Trying for a lower-waste Christmas

Having been trying really hard to reduce our consumption of plastic this year, it goes without saying that we’re trying to have a lower waste Christmas. We don’t tend to produce much more rubbish than usual over the holiday, but there are some improvements that can be made. Having said that, I’m not going to announce a plastic-free or zero waste Christmas around here, because that simply isn’t going to happen. So, as usual, I am counting every bit of plastic avoided as a little win.

One area that we don’t have any control over is how friends and relatives wrap presents for our children. Some of them are very like us and reuse paper and ribbons, which makes life easy. Others use plastic or ‘foil’ wrapping paper and copious sellotape. Things come in shiny (read: plastic) gift bags, and cards come with more ‘foil’ (plastic again) or glitter (yes, more plastic) which render them unrecyclable.

I can’t actually remember the last time we bought any proper wrapping paper, because for over a decade we’ve been cutting off the tape, smoothing it all out and reusing it. We deal with the plastic paper by reusing it the following year. Cards – whether plasticky or not – are cut up to make labels and the remnants recycled. Envelopes are opened up and added to our scrap paper ‘notebook’ (a pile of paper held together by a bulldog clip) and we often give gift bags to the local charity shop to sell again next Christmas.

Our own presents – those that will be unwrapped in the house – are usually ‘wrapped’ in a (reused) cloth gift bag or a (again reused) pretty box tied up with a ribbon. I keep good bags and boxes when we are given them, and you don’t need many. I don’t use tape unless I’ve run out of ribbons, and when we do, it’s the paper stuff. When there’s nothing big enough, plain brown recycled paper (which we found in red last year) does the job, and can easily be rolled up and used again. And thankfully Father Christmas is most obliging, wrapping everything in either newspaper or scraps of wrapping paper too small to be of other use, and because it’s all plastic-free it becomes ready-scrunched tinder for the stoves.

Perhaps this might sound Scrooge-like, saving paper from one year to the next, but to tell the truth I rather like it. It’s much more creative, finding ways to make everyone’s present look pretty without just turning to the latest shiny offering from WHSmiths. Sometimes the children like to potato-print the brown paper packages, sometimes we attach pine-cones and the like to ribbons. I’ve some rather nice two-coloured handspun that I’m going to use, left over from a project, on people who I know will use it again. And there’s always a medley of colours and patterns under our tree.

Filling the advent calendars took a little thought, because I have used plastic-wrapped sweets and chocolates until this year. I made the children’s calendars years ago, and they were one of my very first crafting projects. I sketched out the scenes, worked out a colour scheme and set to work doing some simple embroidery and appliqué. They are far from perfect, and no doubt I’d do a better job now, but the children love them and that’s all that matters.

I toyed with the idea of unwrapped sweets, but they would make the pockets sticky and I don’t want to wash these. In the end, we visited one of the lovely traditional sweet shops in central York, where the woman was incredibly helpful in making sure that I’d have at least the 72 sweets I needed. Then Seb and Ilse spent a happy afternoon wrapping them in scrap paper and stuffing them into the pockets. Before you ask, they always fill their own calendars. They like to put their favourite sweets into special days, and love the whole process.

Christmas cards are not something we’ve ever really got into, and we have no intention of starting now. But there are certain relatives who we do give them to, so a pack of ten is ample. We like to buy them from Oxfam, and I was pleased to find this almost plastic-free pack there. (It has a pointless velcro tab holding it closed.) There’s a hare on five of them…

and a partridge on the others.

Needless to say I’ll be cutting up the cardboard case itself and using it as a couple of postcards.

Food is another thing that won’t really change: we buy most of our Christmas lunch direct from the market stalls and little local shops that we buy from week in, week out. Our butcher will have an unwrapped bird ready for us. The greengrocer will have everything unwrapped, as usual, on his stall. Milk comes from the milkman, and I’ll add a couple of reused glass bottles of juice to our order, for the children. And there are a few glass bottles of frozen elderberry cordial waiting to be paired with some sparkling water from the sodastream. I just need to make sure that the prossecco comes with real corks…

Everyone in our house gets a handmade gift from me, which is pretty low waste, given that I’ve got plans for a tea cosy and some wrist warmers from the leftover yarn. Ilse, Ben and Fliss’s knits are almost done (the hats still need bobbles), and I’m casting on Seb’s later today. I won’t post about John’s here, because he sometimes reads the blog, and Mother and Father’s are going to remain tip top secret. But the children know about their hats, as they no longer all go to bed early enough for secret knitting to take place.

Which brings me to the biggest change we’ve made this Christmas: shopping locally. In previous years we’ve done a mixture of local and online shopping. This year, we’ve enjoyed going into York and getting it all done in just a couple of focused outings. If you take your own bags and choose wisely, it can be virtually waste-free. There have been just a couple of things that I’ve not been able to find in the shops, but I’ve made sure to request minimal plastic, and it hasn’t been too bad.

We took the children into town late on Saturday afternoon, to see the lights and do their little bit of shopping. If you’ve ever been to York in December, you’ll know that it gets absolutely packed, with coach loads of tourists bussed in to enjoy the medieval shambles and independent shops. York feels very Dickensian in the winter, and I can see why people love it. After a while though, the crowds all got a bit much, so we went for a stroll through the deserted Minster Gardens. The stained glass of the minster was glowing, and coming out on the far side of the park, the Treasurer’s House was all lit up for Christmas.

We popped into a favourite little Italian for supper, and it was lovely, sitting there in the noise and the bustle, the last of the shopping at our feet, getting warm and cosy in the ancient heart of the city. Of all the changes we could be making, this must by far be the most pleasant.

I know that we could make even less waste by avoiding Christmas altogether, but we’re not going to do that. Instead, we’re just being that little bit more careful. Over the years we’ve become increasingly conscious of how we celebrate, and to my mind, little shifts made over many years are more effective than one big gesture. Nothing feels painful, the changes are sustainable.

No doubt we’ll do something else differently next year, and then again in the future when the children have all grown up. But for now, this is how we’re trying to have a lower-waste Christmas, and still celebrate the occasion.

Madeleine

Are you trying to reduce your waste/ consumption this Christmas? How are you doing it? I’d love any hints and tips…

Little Flurries knitalong part five: making up

Hello, and welcome to the fifth and final post of the Little Flurries knitalong! This week you are going to be making up your sweaters. Don’t worry, though, if you aren’t at this stage yet. These posts will remain up indefinitely, so you can come back and use this tutorial whenever you’re ready, free of charge.

When I was designing Little Flurries, I knew that I needed a child-friendly neckline. Toddlers heads are disproportionately large, and there are few things more annoying than spending ages knitting a jumper and finding that it won’t go over the recipient’s head. (Yes, I’ve been there.) So I went for a lovely, traditional envelope neckline, which will stretch really wide to go on, but then sit snug and warm over the little person’s shoulders.

The making up starts with this neckline. Lay out your front and back pieces as shown in the photo below. It’s really important that the back shoulder pieces lie on top of the front ones.

You need to overlap the pieces enough so that the curve of the necklines just about meet, like so:

Once you’re happy with your layout, pin the edges of the sweater front and back to the pointed ends of the shoulders:

I started with the right shoulder.

Next, you need to sew these pieces together. The shoulder pieces are actually quite curvy, so don’t expect them to lie flat. Using your fingers and your common sense, start with the tail of yarn at one end and sew the shoulders together, adjusting the fabric as you go.

This isn’t a seam that’s going to be opened out, so you just sew up and down through both layers. Try to make sure that you pick up a whole stitch on both pieces each time. You can see me doing this in the photo below. However, that isn’t always possible, particularly on the pointed ends.

Keep going until you have sewn the shoulders together. The edge should start to look nice and neat in your wake:

When you reach the end of the seam, weave in your end to secure it.

Now you need to find the centre, or topmost point, of the shoulder. Carefully rearrange your sweater pieces so that the neckline is sitting nicely and, using a knitting needle, extend the line from where the front and back meet around the neck to the outer edge of the shoulder. Mark this point with a safety pin.

Now fold the top of your sleeve in half (vertically) to find its centre, and pin the centre of the sleeve to the centre of the shoulder, as shown below.

IMPORTANT: If you have knitted the foldover ‘mitten’ extensions onto the bottoms of your sleeves, make sure that they both lie towards the back of the jumper.

Next you need to measure the specified length from the centre of the shoulder to find where the back underarm point will be. Use your tape measure to find this point, like so: (Ignore the fact that the image is mirrored – it is correct like this.)

Attach the back corner of the sleeve top to this point with another safety pin, and do the same on the front of the sleeve and sweater. Your sweater should look like mine, below.

The rest of the sleeve and body is sewn together in exactly the same way as the Snow Day jumper, so I’ve used that tutorial below. Please don’t be alarmed by the sudden change in the colour of the yarn; it’s just a different sweater. The instructions are correct!

Cut a long piece of yarn and thread it through your tapestry needle. Pull it through the centre of the sleeve top and the shoulder seam, stopping halfway. You’re going to sew the sleeve from the shoulder seam to the armpit in one direction, and then the other, using the same length of yarn. I tend to sew towards the left first, because I am right handed.

Sew the sleeve to the body. The body stitches are easy: stay one stitch (one complete V) in from the edge and pick up the little bit of yarn than runs across the back of the stitches. You can see me picking this up in this photo, below:

The ‘knit’ stitches of the ribbing are picked up as little Vs. The ‘purl’ stitches are harder to pick up as neatly. Just stay a full stitch (two bits of yarn) in from the edge, don’t pull your stitches too tight and honestly, don’t sweat it. Trust me, as long as you get the stitches on the body right, and keep the sleeve spread evenly against the body, the sleeve will look fabulous. Here’s mine:

and of course it will look even better after blocking.

Do the same to the other sleeve.

Now it’s time to sew down the side seam. Align the top of the garter stitch notches on both the front and the back edges, like so:

and pin in place. You’ll notice that the back of the jumper is longer than the front; this is as it should be. Pin the seam, making sure that it is evenly joined all the way from the top of the notch to the underarm.

This is a really easy seam to sew. Just stay one stitch (V) in from the edge and pick up those little horizontal strands of yarn that are hiding behind the stitches. The rows should match up almost exactly. If not, just skip the odd row on either the front or the back, keeping things nice and smooth and even. Again, don’t pull your stitches too tight.

See? The seam is almost invisible already, and it will disappear altogether after blocking.

Now sew up the other side seam.

Finally, it’s time to sew up the sleeve seams. Pin them, taking care to match the bottom edge and the decreases that you made.

Starting at the armpit, thread either a long tail of yarn or a new length and start to sew the seam together. You’ll notice that there are two knit stitches by the edge on one side (looking very neat and V-ish) and two purl stitches on the other side (looking very chaotic). Starting with the purl side, pick up a horizontal strand – or something similar, it really doesn’t matter that much – one stitch in from the edge. Here I am doing this:

On the other, tidy knit stitch side, pick up a horizontal strand. Take care to work exactly one stitch in from the edge, so that you have two lovely neat columns of Vs left outside of the seam:

The reason for this is that when you’ve made a few stitches and pulled them through, it looks virtually seamless:

See? The knit two purl two rib is uninterrupted. However, let’s be honest, this is a seam which is in the recipient’s armpit. Anyone who’s looking that closely probably loves them enough not to mind if your seams are a bit wobbly.

Carry on down the length of the sleeve. May I remind you one last time not to pull those stitches too tight? You’ll find that the increases mean that you have more or fewer knit and purl stitches on each side, and that sometimes the knit stitches and purl stitches even end up on opposite sides to where they started! It really doesn’t matter. Keep stitching things together, one stitch in from the edge, and you’ll end up with a lovely sleeve seam like this:

If you are making a jumper with foldover mittens, you need to fold the mitten extension up onto the outside of the back of the sleeve, and pin it in place along the sleeve seam and the vertical centre fold of the sleeve. Starting at the underarm, sew the seam in the same way as you sewed the side seams. (Sew the vertical mitten seams, but do not sew the horizontal top opening of the mitten shut.) Do the same to the other sleeve.

Now it’s time to weave in all those ends.

There is no magic way to weave ends in, but here are my top tips:

  1. if the end is within spitting distance of a seam, wend your way over there and then go up and down the seam a bit,
  2. 4 inches is plenty to weave in,
  3. work on the wrong side but remember to keep checking the right side in case you can see the woven in end,
  4. work in one direction for a few stitches (up, or left) and then the opposite direction (down or right) before changing direction again, and
  5. resist the urge to tie knots.

As you feel that each end is woven in, snip it off with an inch to spare. The end will adjust when you block it, and then you can snip it right off. This bit of extra length stops it annoyingly poking out or getting loose after blocking.

To block your jumper, soak it in lukewarm (tepid) water for about half an hour – it should be sopping wet. Drain the water and press the jumper against the sides of the basin to get rid of excess water. Lift the jumper out, taking care not to let any parts of it dangle or stretch. Lay it out on a clean towel, roll it up in the towel, and press (or stand!) on it to get the water out of the jumper and into the towel.

By now it should just be damp, rather than soaking. You need a flat surface that won’t be damaged by (or cause damage to) a damp jumper. Take some time to arrange the jumper on this surface, smoothing out any lumps and bumps and making sure that the neckline is lying just so. Use your tape measure to make sure that it is the right width and length. Then leave it to dry.

However, if you’ve knit this in the superwash wool specified in the pattern, and you washed and dried your swatch in a different way, then you should be fine to go ahead and wash and dry the sweater in that way also.

Doing this ‘sets’ the stitches – if you unravelled them now they would be very wiggly indeed. This helps the jumper to hold its shape. It also evens out any uneven stitches in your knitting and smooths the seams.

 

 

A small, sustainable wardrobe: Introducing Under the Ice socks

A series about the clothes we wear and the impact they have both on us and the world around us.

***

It won’t  come as a surprise to anyone that I like to knit my own socks. Hand-knit socks are the warmest, softest, best-fitting socks of all. They are, as Ilse says, like little jumpers for your feet. With the first frosts biting in our part of the world, I’ve been reaching for a pair every day.

Nor will it surprise you to learn that I don’t have an impressive drawer full of socks. I tend to have three or four pairs at any one time, switching out the baggiest and most holey for a new pair each winter. That’s enough for my needs (and our laundry routine) and enough, as they say, is as good as a feast.

Hand-knit socks are expensive, if you buy them – and rightly so. Someone, somewhere in the world, will have spent literally hours and hours on them. If you would like some hand-knit socks and don’t want to knit  them for yourself, you could do much worse than to buy a beautiful pair through a fair-trade concern, ensuring that the maker is properly rewarded for their effort and skill.

I prefer to spend less money on some yarn, and make a slightly larger donation to a development charity, because I love knitting socks. At this time of year, when the frenzy of carol concerts and nativities and children’s parties hits fever pitch, there is nothing I like more than a quiet evening in front of the fire, working round and round on a pair of socks. Sometimes I decide I want that so much that someone gets a pair for Christmas, on top of the pair I knit for myself. This year Ilse has been lamenting her outgrown pair, and I have been happy to oblige her by making her these ones, rather than the hats that the others are receiving. Everyone – including me – is happy.

Socks are one of those things that really make me stop and think about fast fashion. Really, the amount of time it takes to knit a pair of short socks like these pales in comparison to the effort involved in keeping your family in fine-knit woollen over-the-knee stockings. Prior to machine knitting, socks must surely have been a highly-prized possession for all but the very wealthy. And while, nowadays, there are people who devote themselves to knitting the most spectacular sock wardrobes, I can’t imagine having the time to do anything of the sort with a whole family to clothe from scratch. There is a reason we darned socks rather than starting afresh. In a time when I can pick up a pack of socks along with my groceries, they have become hugely underappreciated.

Last winter I wanted to see how much effort it would take to make a pair of socks from raw fleece. There is a wonderful documentary series, made by RTI in the 1970s, called Hands, which explores a whole range of traditional Irish crafts. In one episode, a woman spins yarn from their own sheep to knit her husband a warm new pair of socks. Armed with a fairly fine sheep’s fleece and some alpaca (for strength), I set about doing the same, and I’m wearing the resulting pair as I write this. They are the nicest pair of socks I’ve ever had: soft and warm and strong and elastic. But more than that, I’ve learned a lot of new skills and have a deeper appreciation of the true value of clothing.

I went back to basics this year, creating a pattern along the lines of the first pair that I ever knit, with short row toe and then the heel formed in exactly the same way. It’s a forgiving first pair, because you get to master the hardest part of the sock straight away, and so there’s no danger of having to frog any previous work. Given the fact that I’ve written the pattern out in full English as well as knitters’ abbreviations, there’s little danger of any frogging at all. In fact, I’ve written a full four-part photographed tutorial of every step, just to make things crystal clear. If you can knit reasonably confidently in the round (magic loop on circular needles, though there’s no reason why these couldn’t be worked on four needles), you can make these socks. Even if you’ve never used magic loop before, it’s pretty easy and I do explain it in the tutorials – socks were my first magic loop project and I didn’t come a cropper.

We’ve named these socks Under the Ice because that is what they look like: a  cross-section of a frozen pond in winter. As I wrote for the pattern notes:

Each year, early December is when I realise that the November weather I had mistaken for winter was merely autumn. There are fewer and fewer eggs in the nesting boxes when I go thaw the hens’ drinker, and the birdbath that we keep filled for wild visitors is more often filled with ice than water. I smash the ice on both into a million tiny crystals which glisten on the lawn until the sun finally touches them. But in our little pond, the ice is left intact. There, it sustains life, acting as a strange blanket against the harsher cold above. Under the ice, life goes on. Dormant creatures, from dozing frogs to larvae too small to see lie in the still-wet water beneath. The very depths of the pond are the warmest, where even the coldest Yorkshire night can’t reach.

There is, however, nothing to stop you knitting these in another colour way (my sister is making an ombre pair in two tones of pink), or omitting the stripes altogether. I’ve also included basic instructions on how to knit a pair with contrasting heels and toes. This is a bit of a blank-slate pattern; get this down and you’ll be able to play with colour as you like.

I’ll release the pattern on Monday 3 December, in my Ravelry and Etsy shops. It’ll be available for free for the first 24 hours on Ravelry, so do pop over and pick a copy up if you would like one. After that it’ll become a paid-for pattern, but the tutorials will remain available for free indefinitely.

What with all my Christmas knitting (which is moving along nicely) and the other projects I have lined up, I won’t be getting to my own pair of socks until the new year, but that’s fine by me. I’ve chosen some deliciously soft yarn in Old Pink and am looking forward to a bit of soothing knitting to carry me through those cold, dark evenings. So if you don’t have time for sock knitting this December, I hope you’ll join me in January instead.

Madeleine

Are you an aspiring sock knitter, or an accomplished one? Anyone fancy having a go at these?

 

Little Flurries knitalong part four: the sleeves

Welcome back for the next Little Flurries tutorial. This week you’re going to make the sleeves. Because little people’s arms are so small, you’re going to use your smaller needles. This will ensure that the ribbing stays nice and stretchy, keeping their arms warm but unencumbered.

You cast on at the top of the sleeves. It is vital that you use a stretchy cast on, and one of your larger needles, as you’re going to need this cast on edge to be able to stretch right around the armscye. If you already have a stretchy cast on that you like to use, then go ahead and cast on the correct number of stitches on one of your larger needles. If not, I’ve included some instructions for a stretchy cast on method here.

Make a slip knot and  place it on one of your larger needles, like so:

Make sure you’ve left a long tail, as you’re going to use the yarn from your tail – as well as from the ball – to create the cast on stitches.

Arrange your yarn so that the ball is on your right and the long tail on your left. Then, holding the needle in one hand (or under your arm, if you’re an Irish lever knitter like me) use your left hand to create a diamond as shown in the photograph below. Make sure that your thumb and forefinger are holding out the sides of the diamond.

Move your needle so that it is pointing towards your thumb:

keep going until it goes past and over the yarn held out by your thumb, and then bring it back towards the centre again, going under the outer strand of yarn in the process. It should look like the photo below.

Now keep the needle moving towards the right, so that it goes past and over the yarn held out by your forefinger:

and again, bring it back in so that it comes under the top strand of yarn held out by your forefinger, picking it up on the way, as shown below.

Now take the loop of yarn on your thumb and pass it over the pointy end of your needle:

until you’ve looped it over the top.

Now you can let go of both of your ends and pull them tight. You’ve made a beautifully stretchy cast on stitch. Ta da!

Keep casting on in this way until you’ve got enough stitches on your larger needle. Then, picking up one of your smaller needles, work the first row of the sleeve, which is in 2×2 rib (knit 2, purl 2, etc). Don’t forget that you need your working yarn to be at the back for a knit stitch and at the front for a purl stitch.

Keep going until you’ve worked all the stitches in that row. Then put away your larger needle and work the rest of the sleeve on your pair of smaller needles.

The pattern will tell you how many inches to work before it’s time to start decreasing. You’re going to use exactly the same decreases as you used to shape the envelope necks on the front and back: a combination of k2tog (knitting two stitches together), p2tog (purling two stitches together), ssk (slipping two stitches knitwise and then knitting them together through the  back loop) and ssp (slipping two stitches knitwise and then purling them together through the back loop).

Don’t worry about whether the stitches you are working are knit stitches (i.e. wearing little V-neck sweaters) or purl stitches (wearing turtlenecks). Just follow the pattern as instructed. It’s written so that the 2×2 rib continues uninterrupted, despite the increases.

Here’s a quick reminder of how to work those stitches.

k2tog: simply insert your needle into two stitches instead of one, and knit them at the same time.

p2tog: Bring your yarn to the front, ready to purl.

Insert your needle as you normally would to purl, but instead of just inserting it through one stitch, you need to insert it through two stitches at the same time:

Then purl those two stitches, just as if you were purling one normal stitch.

ssk: slip the next stitch onto your right needle as if you were going to knit it – but don’t work it at all. You can see my needle, inserted as if to knit, below. We are slipping stitches knitwise again in order to twist them around.

Do the same for the next stitch. You can see two slipped stitches on my right needle, below.

Now you are going to knit those two stitches together, but ‘through the back loop’. You do this by inserting your left needle into both stitches at the same time, from right to left. I find it easiest to hold my needles almost parallel:

Once your left needle is inserted, move it so that your needles are perpendicular again, and knit those two stitches together as if you were knitting a normal stitch. You can see my needles in position, ready to do this, below. Then just knit those two stitches as if they were one.

ssp: In order to make the decreases point in the right direction, you need to twist them by slipping them onto your right needle as if you were going to knit them. So you insert your right needle into the next stitch, as if you were going to knit it, as shown here:

and just slip it off your left needle. Do this again, and you should have two slipped (but not worked) stitches with all those purled stitches on your right needle. You can see them in the photograph below.

Next, you need to get those two stitches back onto your left needle, so that you can work them. But you don’t want to twist them back to how they were in the first place. So you need to insert your left needle into both stitches, from left to right, and slip them straight back onto the left needle. You can see how I’ve inserted my left needle to do this, below. Don’t work those stitches at all, yet.

You can see in the picture below that they are back on my left needle, in their new orientation, and not worked.

Now it’s finally time to work those two stitches. You need to insert your right needle into them ‘through the back loop’. This means that you insert your needle as if to purl, but you pick up both stitches at the same time, and you insert your needle from the left hand side at the back. It might all feel a bit tight and awkward, but persevere. You can see my right needle inserted in the picture below.

Then you just purl those two stitches together, as if you were purling one normal stitch.

Once all your decreases have been made, and you’ve knitted to the length specified by the pattern, you’ll have a choice about what sort of cuff you want to work. If you want to just make a normal sweater cuff, cast off loosely when you reach the specified length.

However, if you want to work a foldover-mitten cuff, cast off (loosely) only half the stitches of the sleeve at this point. Keep working the remaining stitches for the specified length. Then, once you’ve done that, you can cast off the remaining stitches (loosely).

Have fun working your sleeves, and see you next week for the ‘making up’ tutorial!

Madeleine

Have you used any of these techniques before making this jumper? Are there any that you’ll adopt for future knitting projects?

All the knitting

There is definitely a seasonality to making. I don’t just mean gift-making in the run up to Christmas, or cotton-frock making in May. Of course I do both those things, but there’s a deeper pull towards certain kinds of crafting at different times of year. In the new year, I want to do nothing but sew. Come spring, I’m ready to spend most of my time in the garden, perhaps with a bit of hand-sewing or embroidery for rainy days. The long summer holidays open up time for spinning and the dyeing of wool. And when September comes, I want to spend all my evenings knitting in front of the fire, right up to the end of the year.

There are always things that I end up doing out of season – I sewed a skirt last month, for instance – but on the whole I’ve come to anticipate this yearly rhythm. Which is why I thought I’d better pull out my stash of wool and remind myself of all the knitting I want to do before the year comes to an end.

First up are the Christmas knits. Just to be clear, I am the sort of person for whom Christmas starts on December 24th. That’s when we put up the tree, festoon the staircase with lights and ivy, and put holly everywhere we can. But the Christmas crafting needs to start quite a bit earlier than that. In fact, once I’ve made the Christmas cake  in October half term, November is upon us and it is high time to get started.

First on – and off – the needles this year was Ben’s hat. A quick and easy knit, it’s just waiting for its bobble. I’ll have a bobble-making-hat-finishing afternoon when all three hats are done, so this one is put away for now.

In progress is a longer project, which I am not going to write about here for tip top Christmas secret reasons. I’m knitting bits of it in between each of the other projects. Suffice to say that it is going swimmingly and it will be a test of my love to give this one away.

Currently on the needles is a second sock, which is both a first-time-sock-knitters’ pattern I’m writing, and Ilse’s Christmas knit. I’ll finish it off this week, but have to keep stopping to shoot the next part of the tutorial in daylight.

Fliss’ hat will be next: this lovely snuggly one in shades of heather. I love it, she loves it, I can’t wait to begin.

Seb’s hat  – the same as Ben’s but in different colours – will be the last of the knits for my children. My auntie Fiona gave me  the lovely book that all three hats are from in the spring, and it is just full of beautiful patterns. I have my eye on a hat I’d like to make for myself, one day, as well as a couple of the snoods. It has inspired practically all my Christmas knitting this year.

There are two more projects that I’m not even going to post the materials for here, as they’ll give the game away. One is a knitting project that I’m collaborating with one of my children on, and the other is a sewing project. Enough said.

Once the hats are all made, I have plans for all the leftover Shetland wool. First up will be a fairisle tea-cosy, as I’ve been meaning to make one for literally years. I don’t have a pattern yet and will probably just make one up.

I bought the pink wool especially, to tie it all together. I like pink a lot, just now.

And then I need a new pair of cuffs. My last pair were discovered hiding in a white wash that had just gone through at a hygienic 60 C. Let’s just say that while the sheets were better for the cycle, the cuffs were not. I might make some from the book, or make up something more fairisle-y and colourful.

Then there are three balls of Drops Alpaca for a new knitting design that is floating around my head. I don’t want to spoil the surprise, but let’s just say that it involves some of my very favourite winter flowers.

And finally, when all that is done, I am going to knit myself a new pair of socks. This is a bit of an annual thing now: making a new pair to replace the oldest and most worn out. I suspect these will be cast on in the new year, because despite my love of wintry sewing you do need to have something to keep your hands busy while you’re relaxing by the fire of an evening.

I make it five weeks until Christmas, and then another week until the new year. I’ve got five Christmas projects to finish, not counting the first hat, the sewing project or the collaboration. Then three more to work through after that. Then there’s the small matter of a job, patterns to publish and oh, a family. The knitting might just go on a little further into the new year that I’d planned. Ahem. But then again, there are worse things in life than a surfeit of knitting.

Madeleine

Are you making anything for Christmas this year? How’s it going? Wishing you good luck and happy crafting!

Little Flurries knitalong part two: the back

Welcome to the second part of the Little Flurries knitalong. This week, you’re going to be working the back of the sweater. As the bottom hem of the back is identical to that of the Snow Day sweater, I’ve used the text and photos from that tutorial for the first part of this one. However, you’ll notice that the colour of the yarn changes partway through this tutorial. That’s because the neckline of Little Flurries is completely different to the neckline of Snow Day – so that part of the tutorial is brand new.

Let’s begin at the bottom hem. You’ve had a bit of practice casting on and knitting while you were making your swatch, so this should be a breeze. In fact, if you get the first 26 rows done over the weekend, you’ll have lots of lovely mindless stocking stitch to relax with in the evenings throughout the coming week.

The first thing you need to do is cast all the stitches onto your larger needle (the one you swatched for). This just makes knitting that first row much easier, as the stitches will be a bit looser than if you cast them onto your smaller needle. However, the smaller needle is used to knit the rest of the hem. So you literally hold the larger needle (with all the cast on stitches on it) in one hand, and the smaller needle in your other hand. I’m right handed and knit in the UK way, so in the photo below the cast on stitches are on the larger needle (on the left), and I’ve just started to knit them all across onto my smaller needle (on the right).

Done? Right, now before you forget, put that larger needle away and pick up the other smaller needle. You should now be working exclusively with your pair of smaller needles. The pattern tells you to knit some rows of garter stitch. Just to remind you, that means that you knit every row. Don’t purl anything.

Once you’ve knitted the required number of rows of garter stitch, you’re ready to work on the notches. In this next section, you’re going to be knitting stocking stitch in the centre of the work, and garter stitch at either end. It’s actually really easy.

You also need to start using your larger needles again. So pick up one of your large needles and use it to work all the stitches of the following row.

We start on the right side, and just knit the whole row. Put the smaller needle (that you’ve just emptied of stitches) to one side, and pick up your other larger needle. You’re going to be working with your pair of larger needles for the rest of the back. Turn your work.

Then, on the wrong side, you need to knit the first five stitches only. In the photo below, that’s precisely where I’m up to. Can you see how the first five stitches are still in garter stitch? That’s because we’re still knitting both sides of those first five stitches.

However, we want the central section to be stocking stitch, so you need to purl all the way across the row until you are five stitches before the end. Don’t forget to bring your yarn to the front of your work before you start purling, like so:

When you get to those last five stitches, stop. Move your yarn to the back of your work again, ready to knit. Then knit those last five stitches, to create the garter stitch notch on the other side of the back.

Take a look at your work, without turning it. From the wrong side, which you’ve just finished working, it will look like the photo below. Those are the first five knit stitches (on the right), and then the purl stitches stretching off to the left. There will be five more purl stitches on the far left edge of your knitting.

Turn your work, and knit the whole row. By the time you finish this row, your work should look like the photo below, on the right side (the side you’ve just finished working).

Can you see the garter notch beginning to emerge on the right hand side? Work a few more rows (in the same way as the previous two) and it’ll be much clearer:

Carry on in this manner until you’ve worked as many rows as the pattern tells you to. Then stop and have a celebratory drink/ dance/ pat on the back. That’s the hardest part of the back done.

Now all you need to do is work the rest of the back in stocking stitch until it reaches the required length (see the pattern to find out what this is in your chosen size). That means that you knit all the stitches on the right side and purl all the stitches on the wrong side. Easy.

Done that? Then it’s time to create the neckline and work that envelope opening.

Working the neckline

The first thing that you need to do is knit the garter stitch section at the front of the neckline, while keeping the shoulder sections in stocking stitch. This is much easier than casting off and picking up stitches to work a separate collar.

All you have to do on the first row is knit the whole thing. On the next row, which is a wrong side row, you need to purl the first 17 stitches. This ensures that this bit of the work will remain in stocking stitch. You can see that I’ve done this in the picture below.

Your yarn will be at the front because you’ve been purling. Move it to the back, ready to knit, like so:

and knit all the way to the last 17 stitches. In the photo below you can see the difference between the first, purled, stitches, and the knitted ones. My pencil is pointing at the first knitted stitch.

Bring your yarn to the front again:

and purl the last 17 stitches. Turn your work. It should look like the picture below, with the stitches at either end still in stocking stitch, and the garter stitch edging beginning to emerge in the middle. My pencil is pointing to the place where the change occurs.

Work the next 4 rows in the same way, knitting the right side rows and doing a combination of knit and purl stitches on the wrong side rows, as directed by the pattern. Please note that the number of stitches you purl changes each time.

Now you’re ready to cast off those centre stitches. Knit the number of stitches specified by the pattern. You can see that I’ve done this, below.

Then knit two more stitches. My metal needle is pointing at the stitch that we are going to bind off first (below). Can you see why you needed to knit two more stitches? If you hadn’t, you would have bound off too early.

Bind off that stitch as normal, by carrying it over the end of your right needle. In the picture below, my metal needle is pointing to the bound off stitch.

Continue to knit one stitch and then bind off the previous stitch until you’ve bound off the required number of stitches. Remember, when binding off you count each stitch as you actually bind it off, not as you knit it. When you’ve done the correct number, you should have one stitch remaining on your right needle (plus the shoulder stitches at the far end) and the number of stitches you are supposed to knit, minus one, on your left needle. You can see this in my photograph below.

Knit the rest of those stitches, and you’ll have the correct number of knit stitches on either side of the bound off section. Your work should look like the photo below. Can you see the two shoulder sections, with the bound off neckline in the middle? (Ignore the bobbles: the front neckline is worked in exactly the same way as the back, so I took these photos while working the front – hence the bobbles.)

The next thing to do is to decrease those shoulder stitches so that they can be sewn together later to form a toddler-friendly envelope neckline.

You are going to work the right shoulder (what would be the right shoulder if someone was wearing it) first. The stitches for the left shoulder will still be on your needle, but just ignore them for now.

The right shoulder actually uses slightly more complicated decreases than the left. They aren’t difficult at all, but it might take you a while to remember them as they have a few steps. However, they are important because they make the collar curve away in the correct direction as the stitches are decreased.

You start with a wrong side row. Purl the number of stitches specified by the pattern. Then stop. This is all I’ve done, below.

Now you need to make your slip, slip, purl (ssp) decrease. In order to make the decreases point in the right direction, you need to twist them by slipping them onto your right needle as if you were going to knit them. So you insert your right needle into the next stitch, as if you were going to knit it, as shown here:

and just slip it off your left needle. Do this again, and you should have two slipped (but not worked) stitches with all those purled stitches on your right needle. You can see them in the photograph below.

Next, you need to get those two stitches back onto your left needle, so that you can work them. But you don’t want to twist them back to how they were in the first place. So you need to insert your left needle into both stitches, from left to right, and slip them straight back onto the left needle. You can see how I’ve inserted my left needle to do this, below. Don’t work those stitches at all, yet.

You can see in the picture below that they are back on my left needle, in their new orientation, and not worked.

Now it’s finally time to work those two stitches. You need to insert your right needle into them ‘through the back loop’. This means that you insert your needle as if to purl, but you pick up both stitches at the same time, and you insert your needle from the left hand side at the back. It might all feel a bit tight and awkward, but persevere. You can see my right needle inserted in the picture below.

Then you just purl that stitch as normal. In the next picture, you can see that the last stitch is just a purl stitch, except that it has purled two stitches into one. That’s the slip, slip, purl stitch (ssp) done.

Move your yarn to the back of your work (as shown below) and knit the rest of the stitches. All of your wrong side rows will be worked in this manner, although the number of stitches to knit and purl varies. Just follow the pattern.

When you get to the end of the row, turn your work. Now you’re going to work the first right side row.

Knit four stitches. Now it’s time to work the slip, slip, knit stitch.

Slip the next stitch onto your right needle as if you were going to knit it – but don’t work it at all. You can see my needle, inserted as if to knit, below. We are slipping stitches knitwise again in order to twist them around – just as we did for the slip, slip, purl stitch.

Do the same for the next stitch. You can see two slipped stitches on my right needle, below.

Now you are going to knit those two stitches together, but ‘through the back loop’. You do this by inserting your left needle into both stitches at the same time, from right to left. I find it easiest to hold my needles almost parallel:

Once your left needle is inserted, move it so that your needles are perpendicular again, and knit those two stitches together as if you were knitting a normal stitch. You can see my needles in position, ready to do this, below.

Then knit the rest of the stitches in the row.

Carry on working all the wrong side rows with the ssp stitch, and the right side rows with the ssk stitch, until you only have one stitch left. Don’t be put off when you have to work an ssp at the start of a new row, or a ssk at the end of a row. Just carry on working the stitches as explained, above. Your work will decrease by one stitch in every row.

Then snip your yarn with a nice long tail and pull it through that final stitch, to secure it. Your right shoulder is done! It should have a nice curve, and the decrease stitches should all point outwards, as below:

Now it’s time to work the left shoulder. You start working this on the wrong side, and you need to rejoin your yarn. The first stitch is a knit stitch (even though you are working into a purl stitch), so insert your needle as if to knit, and lay your yarn across your right needle with the loose end to the left (see below). Knit the first four stitches.

Now you are going to work the ‘purl two together’ (p2tog) stitch. Bring your yarn to the front, ready to purl.

Insert your needle as you normally would to purl, but instead of just inserting it through one stitch, you need to insert it through two stitches at the same time:

Then purl those two stitches, just as if you were purling one normal stitch. That’s the end of the p2tog stitch. Now you just purl to the end of the row.

Turn your work, ready to work a right side row. Knit the number of stitches specified by the pattern, then stop.

Now it’s time to work the ‘knit two together’ (k2tog) stitch. Insert your right needle into the next two stitches at the same time, from left to right, just as if you were knitting one normal knit stitch.

Then knit the two stitches, exactly as if they were just one normal knit stitch. That’s the k2tog stitch done.

Now knit to the end of the row.

Continue working the wrong side and right side rows just like this, remembering to follow the number of knit and purl stitches for every row, because it changes. Don’t be put off when you have to purl two together at the end of a row, or knit two together at the start of a row. You just do it exactly as you’ve done it before.

Keep going until you only have one stitch left, then cut your yarn with a nice long tail and pull it through that final stitch to secure it.

The left shoulder should look like mine, below, with a tail from the joined-in yarn, and the decreases pointing off to the right.

That’s the back done! Come back next week for the knitalong tutorial for the front – time to start working those bobbles…

Madeleine

Who are you knitting your Little Flurries for? Have you gone for a Christmas tree version, or one of the other options?

 

 

 

A small, sustainable wardrobe: special occasions

A series about the clothes we wear and the impact they have both on us and the world around us.

***

I don’t know about you, but I only attend a handful of special occasions these days. This year, I have had to dress up for one christening, one fancy dress party, one 40th birthday bash and I have our Christmas party still to come. The days of all our friends getting married and naming babies are long gone. The days of endless university formal halls and May balls are even further in the past. In fact, I can’t remember the last time I went to a black tie do. I no longer need a selection of cocktail and floor length gowns.

Not that I ever had a particularly large one. I remember one ex-boyfriend commenting poisonously at a college ball about the fact that I was wearing that old thing again. The injustice of men being able to trot out the exact same tux time and again, while women are supposed to look different each and every function is not lost on me. Luckily I didn’t particularly care about such conventions then, and I don’t now. If you have a single outfit that you feel fabulous in, then wear it again and again. Getting all dressed up is for your benefit, not anyone else’s. You are not required to put on a show.

I have precisely one special occasion dress in my wardrobe. I made it out of some beautiful Thai silk that my dad brought back from a trip abroad. It is simple and strappy and almost backless and I adore it. If I need a dress in a hurry – and the last time I wore it I had exactly one day’s notice – I know I can slip it on. I keep all the things to go with it – sheer tights, for example – at the back of my drawer, and it is my beautiful, reliable fall-back option.

Having said that, I haven’t worn it once this year. When I knew that the christening was coming up, I timed the making of a new Sharpen Your Pencils dress to coincide with the date. Something smart and new is just as fun to don as something fancy. I just dressed it up with some gold jewellery, heels and a pashmina. It has been worn to work countless times since: not something I could have done with a sparklier frock.

The fancy dress party required an altogether different look, but the window of my local charity shop offered up the perfect second hand find, net petticoat and all. I happily be-bopped and oo-ooed my way through the backing vocals of a number of Elvis hits, fully intending to return it to the shop so that it could live to serve another party. (I say intending because my girls were not having any of it. They wanted to keep it to wear to their own parties, fancy dress or not. Needless to say, it has already had many more outings.)

The most fun, though, was dressing up for my friend’s 40th last weekend. Help! I wrote to my sister. Do you have a party dress I can borrow? She brought a little selection to our family gathering in Derbyshire and I picked out one I’d borrowed before: a gorgeous vintage-inspired frock in pink with a diamanté bow. I thought I’d just wear it with my rather clunky heels, until I remembered that another friend has the same small feet as me and a rather more extensive wardrobe. She duly turned up with a collection of heels and handbags, so I picked out a couple to finish the outfit off.

Why is it that dressing up in someone else’s things is so much more fun than wearing your own? It is like getting into costume. I have never in my life owned a pair of fake snakeskin shoes, but it was fun to be that person for a night. It was fun to wear a floaty pink dress and carry a boxy mock-croc bag. And it was fun to hand it all back again, knowing that it wasn’t going to sit reproachfully in my wardrobe for the next ten years.

The fact is that sharing is the way forward. In my experience, people aren’t precious about their things. Most people, myself included, just want things to be used. I’m always happy to lend stuff to others, particularly if it saves them from buying something that might be used just once. The sharing economy is something that we’ve heard a lot about it recent years, but it’s not new. It applies to so many areas of our lives: baby equipment, wedding veils, interview suits, a smart black dress for a funeral. Though not all are cause for celebration, these are all special occasions in that they are not (thank goodness) everyday. If you know someone who has what you need, just ask politely if you can borrow it. They might say yes, they might say no. I’ve never known anyone to say no, but I do have generous friends and family. Just be sure to make it clear that they can borrow from you, too.

The world’s resources are too stretched for us all to be buying a new frock for every occasion. There are far too many fancy dresses hanging, unworn, in our wardrobes. Of course there are companies from which you can hire designer dresses, and I would seriously consider using one of these if I needed to. But the truth is that I never have, because I’ve always been lent something lovelier.

So what can you do if you already have a wardrobe full of once-worn fancy frocks? You could pick your very favourite(s) and donate the rest to charity. You could put some up for sale. You could send an email to your friends, letting them know that they can borrow them in the party season ahead. You could organise a swap, where everyone brings and goes away with a complete and newly-configured formal outfit.

Given a conversation I had with my sister-in-law, who was highly amused by the thought of me dressed in gold, I’m not sure that my cocktail dress is going to get an outing this Christmas, either. I suspect a parcel of glittery loans will be landing on my doormat before long. I might keep an eye out at the charity shops for a pair of wear-them-once heels to buy and redonate. Sometimes the things we do for the sake of the planet can be onerous, but this is anything but. It might be a Yorkshire thing, but it’s a lot more fun borrowing and sourcing second-hand than flashing the plastic. I’m quite looking forward to the next time I get to dress up. I wonder who I’ll be?

Madeleine

Do you have a special occasion wardrobe that you rely on, or do you buy a new outfit every time? Or are you a borrower and a lender, like me? Let us know your solutions, because party season is on its way…

Little Flurries – we have a winner!

I’m delighted to announce that my Little Flurries sweater pattern is now available via my Ravelry shop and also my Etsy shop! Please see this post for further details of this 1-5 years beginners’ knitting pattern.

Thank you so much to Carol and Susanne for entering my Little Flurries giveaway. As there were just a couple of entrants, it seems churlish to pick just one, so you both have a pattern on its way to you. Happy knitting!

Madeleine

Little Flurries knitalong part one: gathering and swatching

Welcome to the Little Flurries knitalong! I’m so pleased that you’re making one, and hope that these tutorials make it a fun and confidence-building experience for the even the newest of knitters. The pattern has been designed to be as simple as possible, while still incorporating lots of details to make it a cosy, cute and comfortable sweater for the little people in your life. It is suitable for confident beginners, and assumes that you can cast on, knit, purl and bind off.

Rest assured that these tutorial posts will stay up on the blog for free indefinitely, so there’s no need to rush. Take your time and feel free to leave a comment with any questions or suggestions you might have. If you’d like to receive email notifications of future tutorials and other posts, sign up in the Join Our Community box in the sidebar/ near the bottom of your phone screen. Oh, and don’t be confused by the changing yarn colour. It seems silly to photograph and write up the process of swatching for every different design I make, so I’ve used some photos from the Snow Day tutorial, as well as some new ones.

The yarn that I’ve chosen for Little Flurries is Drops Karisma, for a number of reasons. First, it’s pure wool, which provides the structure and warmth that the pattern calls for. However, I was careful to choose a superwash wool, because I know from first hand experience that most busy parents do not have time to hand wash baby knits. Karisma can go in your machine on a delicates cycle at 40 degrees. Thank goodness for that.

However, like most superwash yarns, Karisma does have a tendency to g-r-0-w, so don’t say I didn’t warn you. For this reason, I strongly recommend that you wash and dry your swatch as you would wash the finished jumper. Then you can pick a smaller size/ change needles as necessary.

Second, it’s a DK yarn. When I designed this pattern’s big sister, Snow Day, I wanted a thick enough yarn to make it almost chunky, and ended up choosing Drops Alaska, which is an aran weight. That would have been far too thick for little people, though – I’m not sure they would be able to move their arms in 2×2 aran weight ribbing! – so I scaled down to a double knitting weight instead.

Third, I loved the colour range. Karisma comes in lots of bold and bright colours, perfect for cheering up a grey and wintry day. (Ignore the pinks in my box above; they were part of the same delivery but for a different project.)

Finally, it’s inexpensive and widely available. We don’t all have big budgets for expensive yarn and overseas shipping costs – although it’s lovely if we do – and I wanted everyone to be able to make this little jumper.

 

If you’d like to make your jumper in another yarn – perhaps an acrylic for those sensitive to wool, or a more luxurious yarn for a special gift – go for it. I’d love to see how they turn out. Just make sure that it has a fairly rounded structure (3 plies or more) to make the bobbles and ribbing pop, and that it has a gauge of 21 stitches and 28 rows over 4×4 inches/ 10×10 cm.

Once you’ve got your wool, you’ll need to determine what size needles to work with. Cast on 21 stitches using the size recommended on the ball band – 4mm for Drops Karisma. Work in stocking stitch as this is the main stitch used (knit 1 row, turn, purl next row) for 28 rows. This is enough to establish the width and length of your knitted swatch. Gently uncurl the edges and hold it flat, without stretching it at all. Measure the width. It should be 10cm almost exactly – you can see from the photo below that mine is.

But what if it isn’t? Not to worry. We all knit with different tension, and even needles purporting to be the same size can differ. All you do is go up a needle size (if your swatch was under 10cm), or down a size (if it was over 10cm).  Knit two rows (no purling) to create a garter stitch line across your swatch. It should now look like the photo below (see that row of purl stitches at the very top?).

Carry on in stocking stitch again, until you’ve done another 28 rows and can measure your swatch again. Keep adjusting your needle size until your swatch measures 10 cm across. Here you can see that by changing up a needle size, the same number of stitches yielded over 11cm, instead of 10. Needle size makes a big difference.

 Don’t worry overly about how many rows you knit per 10cm, as long as you are in the right ballpark (28 rows per 10cm). The pattern will tell you how long each part needs to be, not how many rows to knit (apart from at the hem and neckline). The important thing is to use the right sized needles to be able to consistently knit 10cm across with 21 stitches. I used 4mm needles with the Drops Karisma. Wool and knitters vary. As long as your gauge is right, your jumper will fit.

You will also need a pair of needles 1mm smaller than the size you have decided upon. You don’t need to swatch with these needles, as they are just for the collar, sleeves and hem. For example, because my larger needles (the ones I swatched for) are 4mm, I’m going to use 3mm needles every time the pattern calls for my smaller needles.

Having said that I never wash and block my swatches, you should when trying out a superwash yarn, because it does stretch – quite a lot. Many people suggest putting superwash items in the dryer to shrink them back to size; I don’t have one. Instead, I pressed mine gently, using a pressing cloth. Whatever you plan to do, try it out on your swatch first. Then you won’t get any horrible surprises when you finally wash your finished jumper.

Speaking of the back, that tutorial – including photos – will be available next week, same time, same place. Hopefully you’ll have gathered your wool and needles and made your swatch by then. If you have any questions at all, you can either post them in the comments below, or send me an email direct at mrscecilygraham@gmail.com. In the meantime, why not snap the odd photo of your parcel of wool arriving/ swatching in front of the fire/ general knitting love and send them to me so that I can include them in next week’s post? Alternatively, you can add your photos to your Ravelry account. I look forward to seeing all the yarn that everyone chooses!

Madeleine

Who are you making your Little Flurry for? And which of the options for the front have you chosen?

Introducing Little Flurries – and a giveaway

November is upon us, and any knitter worth their salt is casting around for ideas for Christmas. Enter Little Flurries, a could-be-for-Christmas, could-just-be-a-lovely-jumper pattern for ages 1-5.

At its most festive, this is the jumper that gives you a cosy crafternoon with the little people in your life. Knit it for them, then present it to them with a jar of buttons, tinsel, embroidery silks, little trinkets – the more the merrier. Show me a 3-5 year old who wouldn’t want to wear a jumper with a Christmas tree that they’d decorated all by themselves on the front. And for the under 3s, you get to retain full creative control, as there will probably be far too many choking hazards involved for them to get involved. But as long as everything is securely sewn on, there’s no reason why even the tiddliest toddlers can’t be dressed for the festive season.

My children started by playing with buttons…

before raiding the real Christmas tree basket for some tinsel…

when Ilse suddenly remembered a bracelet which had snapped, leaving her with lots of lovely beads.

I still rather like the button option, especially for younger children. And of course, you could use embroidery, little badges (or buttons, as I believe they are called on the other side of the Atlantic), or whatever you have lying around, really. This is the ultimate project for rooting around in your craft drawers.

Of course, for the budding minimalists among the pre-school set, there is always the refined option of simply wearing it as a lit up tree. Or a tree with multicoloured baubles knitted in. Or even an entirely green tree, to make an understated environmental point.

Being someone who doesn’t like waste, I do like the fact that you can remove the tinsel and the trinkets and turn this back into a simpler sweater to wear for the rest of the winter, before passing it on to someone else to decorate the way they’d like the following year.

Or you can knit one of the three everyday options: bobbles in the same colour as the rest of the jumper, no bobbles at all, or a two-tone version with darker sleeves and bobbles against a lighter body. One model’s mother went for the latter version and I have to say, I love it in the teal. It is pretty and practical and very cosy indeed. My tiniest model will be showing it off next week, but here’s a preview of it in progress:

The bobble-less version, for those who are not so keen on bobbles, still has lots of texture thanks to the warm ribbed sleeves.

I’ve put a huge amount of thought into the development of this pattern. Even before the launch of Snow Day, I was toying with the idea of a pint-sized version. The bobbles and ribbing look lovely in the adult pattern, and I had some ideas for turning them into a sweet little toddler sweater. It wouldn’t be enough to simply resize the pattern; small children would be simply swamped by all that texture in an Aran weight yarn. Mealtimes, playdough and time spent outdoors meant that the jumpers would need to be machine-washable. Yet I wanted the sweater to retain its warmth and its characteristic bobbles and ribbed sleeves. 

So along came Little Flurries: a toddler-sized, DK, envelope-neck version of the Snow Day jumper. I’ve kept the uneven hem, to cover nappy-enhanced bottoms, and added a traditional neckline welcoming to even the most enormous of heads. Instead of thumb holes, the toddler version offers an optional foldover mitten, for quick trips outside when wrestling with real mittens is a step too far. And, of course, I’ve had a lot of fun with the bobbles. The Christmas version – outrageously silly as it is – is my favourite. My children had a huge amount of fun decorating the sample jumper, and as they’re all far too big to wear it, they have started a campaign for bigger ones. Maybe next year.

Whichever version you use, it goes without saying that there will be a knitalong, with a tutorial each week explaining each step with photographs to help you out. This is about the same level of difficulty as Snow Day. It uses some of the same skills (those bobbles and that ribbing) and some different ones too (the shaping is worked with decreases, and there is no increasing at all). The making up is, if anything, slightly simpler, as there is no neckline to knit on.

I’ve knit two of these in the past three weeks, and my mum knit the other one for me. They fairly fly together, if you set your mind to it, in little flurries of knitting on autumnal evenings. For those little flurries otherwise known as small children, of course. Make one. Make two. Make more, if you’re a speedy knitter. However many you make, and whichever design option you choose, I hope you enjoy making your Little Flurries as much as I have.

As with my A-line skirt pattern, I’d like to run a little giveaway for the Little Flurries pattern. I’ll be giving away one copy of the Little Flurries pattern to every ten people who enter. I will round up the number of commenters to the next ten – so if 11 people enter, I’ll give away two copies of the pattern, for example.

If you would like to enter the giveaway, please leave a comment on this post by Thursday 1 November 2018. Please only leave one comment per person, and make sure that you use a valid email address so that I can contact you if you win. I’ll be drawing the winner(s) and sending out the pattern(s) on Friday 2 November. Please note that you need to leave a comment in order to be entered – emails will not count. And if you’d like to leave a comment but don’t want to be entered in the draw, just say so in your comment! You are very welcome to enter both giveaways.

The pattern is suitable for confident beginners. It will be available through my Ravelry shop  from Friday 2 November, and my Etsy shop from Monday 5 November.

Madeleine

Dare I ask if you’ve started any Christmas knitting yet? How would you decorate Little Flurries, if you were to make one?