Welcome to the Little Flurries knitalong! I’m so pleased that you’re making one, and hope that these tutorials make it a fun and confidence-building experience for the even the newest of knitters. The pattern has been designed to be as simple as possible, while still incorporating lots of details to make it a cosy, cute and comfortable sweater for the little people in your life. It is suitable for confident beginners, and assumes that you can cast on, knit, purl and bind off.
Rest assured that these tutorial posts will stay up on the blog for free indefinitely, so there’s no need to rush. Take your time and feel free to leave a comment with any questions or suggestions you might have. If you’d like to receive email notifications of future tutorials and other posts, sign up in the Join Our Community box in the sidebar/ near the bottom of your phone screen. Oh, and don’t be confused by the changing yarn colour. It seems silly to photograph and write up the process of swatching for every different design I make, so I’ve used some photos from the Snow Day tutorial, as well as some new ones.
The yarn that I’ve chosen for Little Flurries is Drops Karisma, for a number of reasons. First, it’s pure wool, which provides the structure and warmth that the pattern calls for. However, I was careful to choose a superwash wool, because I know from first hand experience that most busy parents do not have time to hand wash baby knits. Karisma can go in your machine on a delicates cycle at 40 degrees. Thank goodness for that.
However, like most superwash yarns, Karisma does have a tendency to g-r-0-w, so don’t say I didn’t warn you. For this reason, I strongly recommend that you wash and dry your swatch as you would wash the finished jumper. Then you can pick a smaller size/ change needles as necessary.
Second, it’s a DK yarn. When I designed this pattern’s big sister, Snow Day, I wanted a thick enough yarn to make it almost chunky, and ended up choosing Drops Alaska, which is an aran weight. That would have been far too thick for little people, though – I’m not sure they would be able to move their arms in 2×2 aran weight ribbing! – so I scaled down to a double knitting weight instead.
Third, I loved the colour range. Karisma comes in lots of bold and bright colours, perfect for cheering up a grey and wintry day. (Ignore the pinks in my box above; they were part of the same delivery but for a different project.)
Finally, it’s inexpensive and widely available. We don’t all have big budgets for expensive yarn and overseas shipping costs – although it’s lovely if we do – and I wanted everyone to be able to make this little jumper.
If you’d like to make your jumper in another yarn – perhaps an acrylic for those sensitive to wool, or a more luxurious yarn for a special gift – go for it. I’d love to see how they turn out. Just make sure that it has a fairly rounded structure (3 plies or more) to make the bobbles and ribbing pop, and that it has a gauge of 21 stitches and 28 rows over 4×4 inches/ 10×10 cm.
Once you’ve got your wool, you’ll need to determine what size needles to work with. Cast on 21 stitches using the size recommended on the ball band – 4mm for Drops Karisma. Work in stocking stitch as this is the main stitch used (knit 1 row, turn, purl next row) for 28 rows. This is enough to establish the width and length of your knitted swatch. Gently uncurl the edges and hold it flat, without stretching it at all. Measure the width. It should be 10cm almost exactly – you can see from the photo below that mine is.
But what if it isn’t? Not to worry. We all knit with different tension, and even needles purporting to be the same size can differ. All you do is go up a needle size (if your swatch was under 10cm), or down a size (if it was over 10cm). Knit two rows (no purling) to create a garter stitch line across your swatch. It should now look like the photo below (see that row of purl stitches at the very top?).
Carry on in stocking stitch again, until you’ve done another 28 rows and can measure your swatch again. Keep adjusting your needle size until your swatch measures 10 cm across. Here you can see that by changing up a needle size, the same number of stitches yielded over 11cm, instead of 10. Needle size makes a big difference.
Don’t worry overly about how many rows you knit per 10cm, as long as you are in the right ballpark (28 rows per 10cm). The pattern will tell you how long each part needs to be, not how many rows to knit (apart from at the hem and neckline). The important thing is to use the right sized needles to be able to consistently knit 10cm across with 21 stitches. I used 4mm needles with the Drops Karisma. Wool and knitters vary. As long as your gauge is right, your jumper will fit.
You will also need a pair of needles 1mm smaller than the size you have decided upon. You don’t need to swatch with these needles, as they are just for the collar, sleeves and hem. For example, because my larger needles (the ones I swatched for) are 4mm, I’m going to use 3mm needles every time the pattern calls for my smaller needles.
Having said that I never wash and block my swatches, you should when trying out a superwash yarn, because it does stretch – quite a lot. Many people suggest putting superwash items in the dryer to shrink them back to size; I don’t have one. Instead, I pressed mine gently, using a pressing cloth. Whatever you plan to do, try it out on your swatch first. Then you won’t get any horrible surprises when you finally wash your finished jumper.
Speaking of the back, that tutorial – including photos – will be available next week, same time, same place. Hopefully you’ll have gathered your wool and needles and made your swatch by then. If you have any questions at all, you can either post them in the comments below, or send me an email direct at email@example.com. In the meantime, why not snap the odd photo of your parcel of wool arriving/ swatching in front of the fire/ general knitting love and send them to me so that I can include them in next week’s post? Alternatively, you can add your photos to your Ravelry account. I look forward to seeing all the yarn that everyone chooses!
Who are you making your Little Flurry for? And which of the options for the front have you chosen?