Hello again! Ready to start the front? The weekend would be a great time to work your first few bobbles, so that you’ve got them down pat before the week begins again. Then you’ll be able to knit the rest of the front during the coming week, knowing exactly what you’re doing.
To start with, the front is exactly like the back. If you want a reminder of how the bottom hem and notches are worked, take another look at last week’s knitalong tutorial. Just bear in mind that the pattern specifies a different number of rows for the front and back notches – you don’t do as many for the front. Once you’ve finished the notch section, it’s time to start on the bobbles.
You begin by knitting however many stitches the pattern specifies for your size, in order to reach the point where you will make your first bobble. So take a moment to knit to that place, and then have a quick read of all the bobble instructions before making your first bobble.
You’re going to make a bobble out of the next stitch. In the photo below, the metal needle is pointing at the stitch that you are going to make the bobble out of.
Knit the stitch, but don’t slide it off the left needle. In the photo below, the newly knitted stitch is on the right needle, but the original stitch is still on the left needle (being held on by my index finger). You’ve just made two stitches out of one original stitch.
Put your yarn to the front of your work, so that you are ready to purl.
Now purl into the same stitch (the one that my index finger is touching in the photo above). You can see my inserted needle, ready to purl that stitch, in the photo below.
Again, don’t slide this stitch off your needle. You can now see, as in the photo below, that you have two new stitches (one knit and one purl) on your right needle, and still that same original stitch on your left needle (my index finger is holding it in the photo below).
Move your yarn to the back of your work again, as in the photo below.
and knit into this same stitch again, as you can see me doing below.
This time, you are finally allowed to slide that stitch off your left needle once you’ve knitted it. So you can see, below, that my thumb is indicating the three new stitches that we’ve made out of that single initial stitch. There’s a purl stitch in the centre, and a knit stitch on either side of it.
Okay? So you’ve turned one stitch into three. This provides the breadth of the bobble. Now we need to give it some height. To do this, we’re going to work just these three new stitches for a couple of rows of stocking stitch, as follows:
Turn your work so that the wrong side is facing you, bring your yarn to the front, so that you are set up like the photo below.
Purl the first three stitches. (They are the ones that you have just worked.)
Turn your work again so that the right side is facing you, and move your yarn to the back, as you can see below.
Knit these same three stitches.
Turn your work again so that the wrong side is facing you, bring your yarn to the front once more, as shown in the photo below.
Purl the same three stitches again.
Finally, turn your work so that the right side is facing, and move your yarn to the back again, as shown below.
This is the special bit. You’re going to knit all three of these same stitches together into one stitch. To do this, you literally knit the three stitches as if they were one. You can see that I’m doing this in the photo below. In fact, treating all three stitches as one even makes it look as if I’m only knitting one stitch. I’m not; my needle is inserted through all three stitches knitwise (i.e. as if knitting normally) at the same time.
Wrap your working yarn to make a knit stitch (as usual), move the right needle under the left (as usual) and slide all three stitches off the left needle – just as if you were knitting one ordinary stitch.
That’s it! You’ve made a bobble! It’ll look more like a proper bobble once you’ve worked a couple more rows. For now, just knit a few more stitches, keeping count so that you know when to make the next bobble. In the photo below you can see that I’ve knit my bobble, with all that bulk below and to the right of it, and then three more normal knit stitches.
I assure you that it’ll look much more like a proper bobble in a couple of rows’ time, at which point you’ll be able to give it a prod and a poke from behind to make it more rounded and full. For now though, just concentrate on getting to the end of the row. Remember, count your stitches and stop when it’s time to make the next bobble.
By the time you get to the end of your row, it’ll look something like this:
My empty needle is pointing at one of the bobbles.
Carry on in stocking stitch (knit the right side rows, purl the wrong side rows) for the specified number of rows, then work the next bobble row in exactly the same way. You’ll notice that on the next bobble row there are fewer bobbles and more knit stitches in between them.
Carry on knitting the front of your jumper until you reach the length specified for your size in the pattern, or your desired length (but only if you bought extra wool to allow for extra length). Don’t worry which row of the bobble-making pattern you finish on; it doesn’t matter. Just make sure that you make a wrong side (even numbered) row the last one you work.
Now it’s time to shape the neckline. We’re going to do this in a particularly simple way, with just a hint of shaping to allow the front neck to lie fractionally lower than the back. You’ll find that the neckline naturally curves gently into a lovely boatneck shape the first time you wear it.
Knit the whole next row, and turn your work, ready to purl. The pattern will tell you how many stitches to purl for your size; purl only this number of stitches and stop. It will look like this:
Now turn your work, make sure that your yarn is at the back, ready to knit, and knit the same (small number of) stitches back again.
Turn your work again, and purl the same stitches again. Your work should now look like mine does below, with the small section you’ve just worked a couple of rows longer than the rest of the neckline.
Now you are going to carry on purling the rest of the row, but you need to be really careful with the next stitch. Purl it really loosely, so that the longer section that you’ve just created will be able to stand up higher than the middle bit of the neckline. You’ll know that you’ve done it well if there’s just the littlest of little holes to show where the join is. The needle is pointing at mine in the photo below.
Can you see how the fabric to the left of it is a couple of rows longer than the fabric to the right? By leaving that stitch nice and loose, the longer part of the neck will be able to extend straight up when we bind it off in a minute.
So, you’ve now purled all the way across the top of the front and are about to work the other raised shoulder bit. Knit the number of stitches specified for your size in the pattern, and stop. It will look like this:
Turn your work, bring your yarn to the front and purl those same few stitches back again. Now turn your work again and bind off the same number of stitches.
You’ll find that the last stitch to be bound off will be joined to the lower part of the neckline. Again, you need to make sure that this stitch is nice and loose so that the longer part of the front can stand proud of the lower part.
Knit all the way across the row. Then turn your work and, in purl, bind off the same small number of stitches specified in the pattern. Leaving a nice long tail, cut your yarn. Your front will now look like this:
Can you see the two bits that stick up at either end? They are the shoulders of your jumper.
You will need your needles to knit the sleeves next, so transfer the live stitches to a spare needle, stitch holder or length of spare yarn. That’s the front done!
How are you enjoying knitting your Snow Day? Any questions or feedback? Please let me know in the comments!